澳门威斯尼斯人6778

Home > Product Center
16.8 Tons engineering rear axle
Introduction:

PSC826 feature (16.8 Tons)
The converging oil seal greatly reduces the leak risk, also prolongs the service life of oil seal.
High strength hypoid gear with better torque transfer ability than spiral bevel gear.
Reinforced ductile cast iron housing, the axle rigidity superior to the stamping and welding housing at the same level.
Large range of speed ratio, with hub reduction, meet customer different requirements.
Carrier is installed with ring gear anti-thrust screw, which prevents the ring gear from getting deformed at high load.
A variety of rim mounting distance, which meets the requirements of customers for more flexibility.
Multiple sets of magnets attached to inside of housing, decreasing the lubricating oil pollution.
Optional differential lock improves the power output distribution of the vehicle in the bad road conditions.
The parking brake device at the carrier input end (option for customer).

The product is applicable to:Off-road crane, port unmanned carrier, etc.

Technical Parameters Other

轮边速比:3.6,主减速比:2.93-6.14
单桥承载:时速=40kph时,最大承载16.8t;最大静承载60t
最大转向角25°
适用轮辋及轮胎:17.0X25"/20.5X25"
驻车制动器油压=1450-2030PSI,制动力矩=4470N.m;行车制动器最大油压=2300PSI,制动力矩=22777N.m